Hire Projects
A challenging new design for ACE Winches, the client required a significantly smaller riser pull-in equipment package than the traditional model to be incorporated into their existing framework on the main deck level on the Lucius spar platform.
With limited deck space and extreme operating…
The Çanakkale 1915 is a 3.7km suspension bridge being built over the Dardanelles Strait in the Çanakkale province of Turkey. Located at the western end of the Marmara Sea. The new bridge is expected to improve the transportation network in the country, and promote socio-economic growth and…
2 x 120te Mooring Winch Packages 4 x ACE 80te Deck Winch Packages 16 x ACE Operational Personnel
ZPQ PlatformThe Zawtika Processing and Living Quarters platform produces gas for supply to Myanmar and Thailand. The project development also includes the Kakonna and Gawthaka gas…
1 x ACE 120te Topside Load-out Winch Package 6 x ACE Operational Personnel
LSP-1 and LSP-2 PlatformsLSP-1 is the primary production facility at the Yuri Korchagin field, performing drilling and process operations. The platform is supported by the LSP-2 accommodation unit. The…
ACE Hire Equipment commissioned a Floatover Installation Package for Saipem, Singapore.
Accompanied by six ACE Hire Personnel, six winch packages were mobilised including two ACE…
The ACE Linear Chain Winch has been designed to accommodate 84mm chain. Unlike a conventional rotary winch, the Linear Chain Winch is not constrained by the amount of product the winch drum can hold, or suffer loss of pulling power as the product spools higher onto the drum. The Linear Winch is…
The ACE 50te SWL 4-Track Tensioner includes a caterpillar track system for hauling or veering cable, umbilical, steel pipe or similar round tubular products. The unit is designed for horizontal deployment. Enclosed within a lift frame the tensioner operates by gripping the product between four…
The 500te RDS was designed and manufactured at ACE Winches facilities. The product range includes a 200te and a 400te RDS which were developed for high tension spooling and have been used in the deployment and recovery of subsea products such as umbilicals, risers and flow lines, flexible…
We designed, engineered and manufactured two 120te Hydraulic Drum Winch packages for the project. As part of the supply, we delivered a bespoke wireless control system which allowed the winches to be synchronised for simultaneous operations from the two locations.
HPU CONTROL…